80407
| Kindly note our Quantity Discounts | |
|
80407 |
Vacuum Brazed Drill Bits for EXTREMELY HARD CERAMICS |
|
M14-Joint |
| Article No. | Core Drill Bit | galvan. Diamond Rim Height | Price excl. VAT | 19% VAT | Price incl. VAT |
| Diameter / Length | Height | Euro/pc | Euro/pc | Euro/pc | |
| 80407.06.10 | 6 x 50 mm |
10,0 mm |
18,00 | 3,42 | 21,42 |
| 80407.08.10 | 8 x 50 mm |
10,0 mm |
22,00 | 4,18 | 26,18 |
| 80407.10.10 | 10 x 50 mm |
10,0 mm |
25,00 | 4,75 | 29,75 |
| 80407.12.10 | 12 x 50 mm |
10,0 mm |
28,00 | 5,32 | 33,32 |
| 80407.20.10 | 20 x 50 mm |
10,0 mm |
32,00 | 6,08 | 38,08 |
| 80407.27 | 27 x 50 mm |
3,5 mm *) |
22,00 | 4,18 | 26,18 |
| 80407.27.10 | 27 x 50 mm |
10,0 mm |
35,00 | 6,65 | 41,65 |
| 80407.35 | 35 x 50 mm | 3,5 mm *) | 29,00 | 5,51 | 34,51 |
| 80407.35.10 | 35 x 50 mm | 10,0 mm | 39,50 | 7,51 | 47,01 |
| 80407.40.10 | 40 x 50 mm | 10,0 mm | 42,00 | 7,98 | 49,98 |
| 80407.50 | 50 x 50 mm | 3,5 mm *) | 42,00 | 7,98 | 49,98 |
| 80407.50.10 | 50 x 50 mm | 10,0 mm | 49,50 | 9,41 | 58,91 |
| 80407.60.10 | 60 x 50 mm | 10,0 mm | 59,90 | 11,31 | 70,81 |
| 80407.65.10 | 65 x 50 mm | 10,0 mm | 62,00 | 11,78 | 73,78 |
| 80407.75.10 | 75 x 50 mm | 10,0 mm | 72,00 | 13,68 | 85,68 |
| joint M14 - hex or SDS plus | withhout center drill | 7,00 | 1,33 | 8,33 | |
|
Kindly read befor use - do not use center drill - with larger boring diameters do not start vertically but slightly tilted and after you have found a start move slowly into vertiacal posiston before real boring - do not exert pressure while boring; with small diameters it may take 5 to 8 minutes - during boringslightly rotate boring axis to remouve material out of boring hole, - when boring mounted tiles change the drill bit after you are through with the tile and do not bore into the concrete - DRY boring is possible but WET boring is very much better; You may take from your kitchen a spray device to add water - with the small diameters you may be able to bore a few holes only, especially if you do DRY boring - before you start a second boring remove the bor core out ouf the drill bit
|
|||||
|
|||||
|
|
|||||
 Email
Diamond Tools GmbH
|
|||||
| Copyright © 1998, 2007, Dr. Heinemann Diamond Tools & Parts GmbH | |||||
