Areas of application for floor grinding tools
Our Diamond Tools are made of high quality diamonds in a consistent high concentration
Your benefits are:
- an even and fine grinding pattern without scratches
- an excellent tool life
- a very good working speed
- a minimum strain on the machine in use
Grinding different surfaces
Please find following different application ranges for the use of our floor grinding tools. As you might be faced with new and different problems in practical use please contact us if you have any questions.
Our segments are well adapted to different surfaces for an excellent working speed and tool life. Please find following our color code for an easy selection of the right tools for your application:
- Green: abrasive/sandy/soft materials for example green concrete or screed
- Red : hard concrete or screed
- Blue: very hard concrete or screed
- Silver: PCD – Split or PCD segments for coatings
The tools must be matched to the floor grinding machine in use. We offer the following tools:
- Grinding plates with M8 –connector
- Grinding plates with M6 – connector
- Ø 250 mm grinding plates with an universal connector for single disc grinding machines
Our diamond-grinding plate are produced with a medium size grit and are perfectly suitable for:
- Light sanding and grinding down of screed, concrete, partly coatings and fillers
- Leveling out uneven surfaces
- Light sanding of terrazzo floors and design screed
- Grinding down of Epoxy or PU – coatings
Please contact us if you require grinding tools with coarser or finer grit sizes.
PCD grinding plates have the advantage over diamond grinding plates that they do not get smeared up. They are used for removing
- adhesives
- filler materials
- bitumen
- sealants
- color layers
- epoxy
- elastic materials
PCD – Split
Tough and durable tool with PCD – splinters for very aggressive grinding with a coarse grinding pattern. It is the ideal tool for removing:
- filling materials and adhesives
- very hard coatings
- pre grinding of very hard filling materials
- grinding of mastic asphalt or other bituminous surfaces
It is a general rule for all grinding tools that a good dust extraction helps to improve the grinding result.
Further information to these products you will find Diamond floor grinding tools
Grinding cups for floor grinding machines
As an alternative to grinding plates the following grinding cups can be used on floor grinding machines:
- Grinding cup “Double Row”
- Grinding cup “Tornado”
- Grinding cup “Turbo”
- Grinding cup “Fan Shape”
Grinding of edge- and corner areas
Grinding wheels / cups are often used on hand held machines for grinding edge- and corner areas. The following grinding cups are available:
- PCD grinding cups for removing coatings
- diamond grinding cups for grinding concrete and screed
- special grinding cups for removing coatings and grinding concrete/screed in one operation
For more information about the polishing of different surfaces please follow this link: Polishing
Contact
Dr. Heinemann
Diamond Tools & Parts GmbH
Sonnenhalde 18-20, 74677 Dörzbach
Telefon: +49 (0) 7937 802 900
Telefax: +49 (0) 7937 802 90 29
E-Mail: service(at)diatools.com